|

Surface Preparation before Epoxy Flooring

Concrete is the most appropriate surface for laying epoxy floors. Although it may also be applied on surfaces of wood and steel. There are several reasons why most people prefer to have epoxy floor paint on their floors than other flooring solutions. It is a cost-effective method of improving the looks of your floor. Its durability and strength makes them a smart choice for those who want to maximize their budget, without compromising the look that they want to achieve. However, the key in achieving the best result is through the surface preparation. A proper surface preparation will ensure maximum adhesion of epoxy coatings.

Surface Preparation Prior to Application
Examine the surface where you intend to lay epoxy coatings. Make sure that it is clean and free from any dirt, grease, oil, brake fluid and other substances. It is a lot easier to apply epoxy coats if you are having a new concrete. However, it must first undergo the process of curing for at least 28 days at a suitable temperature. For old and existing concrete, repair any surface defects and fill the holes and cracks, if there is any. If the paint is already peeling or starts to deteriorate, remove it completely. Washing the surface with a degreaser or using a steam cleaner and a pressure washer can also be done. Sand blasting, shot blasting, diamond grinding and acid etching are also effective methods for surface preparation.

Caring for the Floor
Having epoxy flooring, whether at residential or commercial areas, only little maintenance is required. Cleaning can be done with warm water and degreaser or mild detergent. A soft scrub using nylon bristle brush or non-abrasive plastic cleaner are also recommended if you want to have a detailed cleaning.

Epoxy flooring is also known as polymer seamless floors. These floorings are sometimes used as replacement for a concrete sealer. They are made popular because of its durability and being resistant to chemicals and heavy foot traffic. The floor also looks very bright, since it reflects any form of light, which is a great addition for its aesthetic value. An epoxy floor system is absolutely the best floor covering that can give you many advantages. Bear in mind that the best result can be obtained through proper surface preparation. Adhesion of the epoxy floor coating and its durability is greatly affected by how the surface was being prepared.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *